nixConfig/README.md

# nixConfig
This repository contains the configuration of all our machines running NixOS.

## Build a machine
There are multiple ways to build and deploy a machine configuration. Which is the
most appropriate depends on the context and scenario. So first there will be a general
explanation how this works and afterwards we will talk about some scenarios.

If you run `nix flake show` you should get an output similar to this
```
$ nix flake show
git+file:///home/nerf/git/nixConfig?ref=refs%2fheads%2fnyarlathtop&rev=9d0eb749287d1e9e793811759dfa29469ab706dc
├───apps
│   └───x86_64-linux
├───checks
│   └───x86_64-linux
├───devShells
│   └───x86_64-linux
├───formatter
├───legacyPackages
│   └───x86_64-linux omitted (use '--legacy' to show)
├───nixosConfigurations
│   └───nyarlathotep: NixOS configuration
├───nixosModules
├───overlays
└───packages
    └───x86_64-linux
```
we can see there is an output called `nixosConfigurations.nyarlathotep` which contains the configuration of the machine
called nyarlathotep. `nixosConfigurations` is special in that sense, that `nixos-rebuild` will automatically look
for this key and assume how it is structured. The interesting part for us is the derivation `config.system.build.toplevel`.
Its closure contains the whole system and the resulting derivation a script that changes the current system to
that derivation. (called `/bin/switch-to-configuration`).

So what we want to archive is populate the nix store of the target machine with the closure of the derivation
`.#nixosConfigurations.<name>.config.system.build.toplevel` and run the the resulting script on the target machine.


### Local
It has multiple benefits to build the system configuration on the local computer and push it to the target server.
For example one doesn't stress the server with the load of evaluating the expression and building the closure. Also the server
doesn't need to fetch the build dependencies this way. One has a local check if at least the nix syntax was correct.
And so on...

#### Build
If you have this repository local in your current directory you can just run
```
$ nix build .#nixosConfigurations.<name>.config.system.build.toplevel
```
to build the system configuration of the machine `<name>`.

But you don't need to clone this repository, for more see the `nix flake --help` documentation about flake urls.

#### Copy
After we build the derivation we need to get the closure onto the target system. Luckily nix has tools to do that
via ssh. We could just run:
```
$ nix copy -s --to <however you setup your ssh stuff> .#nixosConfigurations.<name>.config.system.build.toplevel
```
This will evaluate the flake again to get the store path of the given derivation. If we want to avoid this,
we might supply the corresponding store path directly.

The `-s` is important: it makes the target machine substitute all derivations it can (by default from chache.nixos.org).
So you only upload configuration files and self build things.

To be able to copy things to a machine they need to be signed by someone trusted. Additional trusted nix keys are handled
in `./nixos/roles/nix_keys.nix`. So to get yourself trusted you either need to install one derivation from the machine itself,
or find someone who is already trusted, to push your key.

For more information on signing and key creation see `nix store sign --help` and `nix key --help`.

#### Activate
Log into the remote machine and execute (with root privileges)
```
# /nix/store/<storepath>/bin/switch-to-configuration boot
```
That will setup a configuration switch at reboot. You can also switch the configuration live. For more
details consider the `--help` output of that script. The storepath (or at least the hash of the derivation)
is exactly the same it was on your machine.


If you have a `nixos-rebuild` available on your system, it can automatize these things with the `--flake` and
`--target-host` parameters. But there are some pitfalls so look at the `nixos-rebuild` documentation beforehand.

### On the machine

Clone this repository to `/etc/nixos/` and `nixos-rebuild boot` or `nixos-rebuild switch` that will select
the appropriate machine based on hostname.

If the hostname is not correct, or you don't want to clone this flake, you can also use the `--flake` parameter.

In any case, to switch the system configuration you will need to have root privileges on the target machine.

## Installing a new machine

You have written a configuration and now want to deploy it as a new machine. You need to get the build configuration on the
`nixos-installer` machine (regarding this machine see issue [#10]). You can either use either any of the
versions above, or just continue then the machine will build the configuration implicitly.

### Disk layout

You will need to assemble the disk layout manually, we assume you do it below `/mnt` as the nixos-install tools
assume this as the default location (they have an option to change that consider their `--help` pages).

This repository loads some default configuration that expects certain things. Your hardware configuration of that machine should
reflect those.

- `"/"` is a tmpfs
- `"/persist"` is the place where we keep data that can not be regenerated at any boot, so this should be a permanent disk
- `"/nix"` the place the nixstore resides, needed to boot the machine should also be persistent
- `"/boot"` the place for bootloader configuration and kernel also persistent
- any additional data paths for your machine specific needs. Choose filesystems accordingly.

My recommendation is to put `"/persist"` and `"/nix"` on a joint btrfs as subvolumes and `"/boot"` on separate disks (because grub
will give you a hard time if you do it as a subvolume or bind mount (even though that should be possible but is an upstream problem)).
For how to configure additional persistent data
to be stored in `"/persist"` look at the impermanence section as soon it is merged. Before this look at issue [#9].
I do not recommend this for actual high access application data like databases mailboxes and things like it. You should
think about this as data that if lost can be regenerated with only little problems and read/written only a few times
during setup. (Like the server ssh keys for example). The configuration also setups some paths for `"/persist"` automatically,
again look at the impermanence sections.

#### File system uuids

You might end with a bit of a chicken/egg problem regarding filesystem uuids. See you need to set them in your system configuration.
There are two ways around that. Either generate the filesystems read out the uuids, and push them into the repository holding
the configuration you want to build, or generate the uuids first, have them in your configuration and set them upon filesystem creation. Most
`mkfs` utilities have an option for that.

### Installing

Just run
```
nixos-install --flake 'git+https://gitea.mathebau.de/Fachschaft/nixConfig?ref=<branchname>#<name>'
```
where `<branchname>` is the branch you install from and `<name>` is the name of the configuration you build.
If the build system is already in the nix store this will start the installation, else it will first attempt to build
it. That should be the whole installation process, just reboot. The machine should be fully setup. No additional user
or service setup, after the reboot.


## How to write a new machine configuration
At best, you take a first look at already existing configurations. But here are a few guidelines.
Make a new folder in `/nixos/machines`. The name of the folder should match the hostname of your
machine. The only technically required file in there is `configuration.nix`. So create it.

A good skeleton is probably:
```
flake-inputs:
{config, pkgs, lib, ... }: {

imports = [
  ./hardware-configuration.nix
  ../../roles
  ./network.nix

  <your additional imports here>

  ];

  <your system config here>
  networking.hostname = "<your hostname>"; # this will hopefully disappear if I have time to refactor this.
  system.stateVersion = "<state version at time of install>";
}
```
The import of `../../roles` loads all the nice default setup that all these machines have in common. There the
impermanence configuration is loaded as well as ssh, sops, shared user configuration and much more.
The other two imports are suggestions how you should organize your configuration but not enforced by anything.
In your hardware
configuration you should basically only write you filesystem layout and your hostPlatform. The bootloading stuff
is already taken care of by `../../roles`.

As of moment of writing `network.nix` should contain ip, nameserver and default gateway setup. As parts of
this is constant across all systems and will undergo refactor soon.

I would recommend to split your configuration into small files you import. If this is something machine specific (like
tied to your ip address hostname), put it into the machine directory. If it is not, put it into `/nixos/roles/` if it
is not but has options to set, put it in `/nixos/modules`.

## How this flake is organized

This flake uses `flake-parts` see [flake.parts](https://flake.parts) for more details. It makes handling
`system` and some other modules related things more convenient.
For the general layout of nixos system configuration and modules, please see the corresponding documentation.

The toplevel `flake.nix` contains the flake inputs as usual and only calls a file `flake-module.nix`.
This toplevel `flake-module.nix` imports further more specialized `flake-modules.nix` files from sub-directories.
Right now the only one is `nixos/flake-module.nix`. But if we start to ship our own software (or software versions,
with specific build flags), this might get more.

### nixos
The `nixos` folder contains all machine configurations. It separates in two folders `nixos/machines` and `nixos/roles`.
The corresponding `flake-module.nix` file automatically searches for `machines/<name>/configuration.nix`, and evalutes
those as nixos configurations, and populates the flake.

#### machines
`nixos/machines` contains all machine specific configuration (in a sub-folder per machine). Like hardware configuration, specific
network configuration. And service configuration that are too closely interwoven with the rest of that machine (for example
mailserver configuration depends heavily on network settings). It also
contains the root configuration for that machine called `configuration.nix`. This file usually only includes other modules.
These `configuration.nix` files are almost usual nix configurations. The only difference is that they take as an extra argument
the flake inputs. This allows them to load modules from these flakes. For example, nyarlathotep loads the simple-nixos-mailserver
module that way.

#### roles
`nixos/roles` contains configuration that is potentially shared by some machines. It is expected that `nixos/roles/default.nix`
is imported as (`../../roles`) in every machine. Notable are the files `nixos/roles/admins.nix` which contains
common admin accounts for these machines and `nixos/roles/nix_keys.nix` which contains the additional trusted
keys for the nix store.

## sops

We are sharing secrets using [`sops`](https://github.com/getsops/sops) and [`sops-nix`](https://github.com/Mic92/sops-nix)
As of right now we use only `age` keys.
The machine keys are derived from their server ssh keys, that they generate at first boot.
To read out a machines public key run the following command on the corresponding machine.
```
$ nix-shell -p ssh-to-age --run 'cat /etc/ssh/ssh_host_ed25519_key.pub | ssh-to-age'
```
User keys are generated by the users.
New keys and machines need entries into the `.sops.yaml` file within the root directory of this repository.

To make a secret available on a given machine you need to configure the following:

```
sops.secrets.example-key = {
  sopsFile = "relative path to file in the repo containing the secrets (optional else the sops.defaultSopsFile is used)";
  path = "optinal path where the secret gets symlinked to, practical if some program expects a specific path";
  owner = user that owns the secret file: config.users.users.nerf.name (for example);
  group = same as user just with groups: config.users.users.nerf.group;
  mode = "permission in usual octet: 0400 (for example)";
};
```
Afterwards the secret should be available in `/run/secrets/example-key`.
If the accessing process is not root it must be member of the group `config.users.groups.keys`
for systemd services this can be archived by setting `serviceConfig.SupplementaryGroups = [ config.users.groups.keys.name ];`
it the service configuration.